Smart Lighting

The CNV-DMXR converts DMX signal to a 0-10V dimming signal. It complies with both DMX RDM and Traditional DMX networks. It uses the LED driver's Dim-to-Off capability to eliminate the AC Switch or Relay and is powered by the 12Vdc with a simple 3-wire connection to the driver.

The CNV-SNAP-AN0 wireless network interface module that enables one or more Inventronics LED drivers to be controlled by Synapse Lighting Control networks. It uses the Dim-to-Off capability of Inventronics LED drivers along with their always-on auxiliary power to provide wireless connectivity at the lowest system cost. Its compact design and flexible deployment options make it ideal for both indoor and outdoor lighting systems and a wide array of luminaires.

This product has been discontinued The CNV-ZIGB is a wireless dimming signal converter that enables one or more Inventronics LED drivers to be controlled by the Daintree Networks® ControlScope® building control solution. Using the CNV-ZIGB with other interoperable Daintree devices, Control

The EBM-1K2SxxxMG series is suitable for global use (except North America). They consist of 1200W, programmable IP66/IP67 LED drivers that operate from 176-305Vac. They offer Controls-Ready features such as Dim-to-Off and an Always-On Auxiliary Power, isolated dimming, two-way communication via Digital Dimming and a high level of surge protection. They are ideal for high mast, stadium, aquaculture and horticulture lighting applications.

The EBS-040SxxxBT2 series is suitable for global use (except North America). They consist of 40W, DALI-2 D4i certified, IP20 LED drivers that operate from 176-305Vac. They provide wireless programming via NFC, are Controls-Ready and designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, tunnel and low bay lighting applications.

Not Recommended for New Design
We Recommend the EBS-040SxxxBT2 as a Replacement
The EBS-040SxxxBTE series is suitable for global use (except North America). They consist of 40W, DALI certified, programmable IP20 LED drivers that operate from 176-305Vac. They are Controls-Ready and designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, area and industrial lighting applications.

Not Recommended for New Design
We Recommend the EBS-040SxxxDT2 as a Replacement
The EBS-040SxxxDTE series is suitable for global use (except North America). They consist of 40W Controls-Ready, programmable IP20 LED drivers that operate from 176-305Vac. They are designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, area and industrial lighting applications.

The EBS-080SxxxBT2 series is suitable for global use (except North America). They consist of 80W, DALI-2 D4i certified, IP20 LED drivers that operate from 176-305Vac. They provide wireless programming via NFC, are Controls-Ready and designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, area and industrial lighting applications.

Not Recommended for New Design
We Recommend the EBS-080SxxxBT2 as a Replacement
The EBS-080SxxxBTE series is suitable for global use (except North America). They consist of 80W, DALI certified, programmable IP20 LED drivers that operate from 176-305Vac. They are Controls-Ready and designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, area and industrial lighting applications.

Not Recommended for New Design
We Recommend the EBS-080SxxxDT2 as a Replacement
The EBS-080SxxxDTE series is suitable for global use (except North America). They consist of 80W Controls-Ready, programmable IP20 LED drivers that operate from 176-305Vac. They are designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, area and industrial lighting applications.

Not Recommended for New Design
We Recommend the EBS-120SxxxBT2 as a Replacement
The EBS-120SxxxBTE series is suitable for global use (except North America). They consist of 120W, DALI certified, programmable IP20 LED drivers that operate from 176-305Vac. They are Controls-Ready and designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, area and industrial lighting applications.

Not Recommended for New Design
We Recommend the EBS-120SxxxDT2 as a Replacement
The EBS-120SxxxDTE series is suitable for global use (except North America). They consist of 120W Controls-Ready, programmable IP20 LED drivers that operate from 176-305Vac. They are designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, area and industrial lighting applications.

Not Recommended for New Design
We Recommend the EBS-165SxxxBT2 as a Replacement
The EBS-160SxxxBTE series is suitable for global use (except North America). They consist of 160W, DALI certified, programmable IP20 LED drivers that operate from 176-305Vac. They are Controls-Ready and designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, area and industrial lighting applications.

Not Recommended for New Design
We Recommend the EBS-165SxxxDT2 as a Replacement
The EBS-160SxxxDTE series is suitable for global use (except North America). They consist of 160W Controls-Ready, programmable IP20 LED drivers that operate from 176-305Vac. They are designed in a Zhaga compatible form factor with convenient push terminals that provide flexibility and easier installation. They are ideal for indoor and outdoor use such as street, area and industrial lighting applications.

The ESM-150SxxxBT series is suitable for North American use. They consist of IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with DALI-2 D4i, design flexibility and a high level of surge protection. They provide integrated AC power monitoring, Always-On Auxiliary and Dim-to-Off functionality for powering low voltage controls. They operate from 249-528Vac and provide the full 150W at a wide output current range. They are ideal for high bay, area and roadway lighting applications.

The ESM-240SxxxBG series is suitable for global use. They consist of IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with DALI-2 D4i, design flexibility a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They provide integrated AC power monitoring, Always-On Auxiliary and Dim-to-Off functionality for powering low voltage controls. They operate from 249-528Vac and provide the full 240W at a wide output current range. They are ideal for high bay, area and roadway lighting applications.

The ESM-240SxxxLG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with digital dimming, isolated dimming, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 249-528 Vac and provide the full 240W at a wide output current range.  They are ideal for high bay, high mast, horticulture and stadium lighting.

The ESM-240SxxxLT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers that offer NFC wireless programming, driver health monitoring with digital dimming, isolated dimming, design flexibility, more compact design and a high level of input surge protection. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 249-528Vac and provide the full 240W at a wide output current range.  They are ideal for high bay, high mast, horticulture and stadium lighting.

The ESM-240SxxxMG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that offer programmability, isolated dimming, low inrush current, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They provide Dim-to-Off functionality and Auxiliary Power for powering low voltage controls. They operate from 249-528 Vac and provide the full 240W at a wide output current range.  They are ideal for high bay, high mast, horticulture and stadium lighting.

The ESM-240SxxxMT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers that offer programmability, isolated dimming, low inrush current and a high level of input surge protection. They provide Dim-to-Off functionality and Auxiliary Power for powering low voltage controls. They operate from 249-528Vac and provide the full 240W at a wide output current range.  They are ideal for high bay, high mast, horticulture and stadium lighting.

The ESM-320SxxxLG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with digital dimming, isolated dimming, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 249-528 Vac and provide the full 320W at a wide output current range.  They are ideal for high bay, high mast, horticulture and stadium lighting.

The ESM-320SxxxLT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers that offer NFC wireless programming, driver health monitoring with digital dimming, isolated dimming, design flexibility, more compact design and a high level of input surge protection. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 249-528Vac and provide the full 320W at a wide output current range.  They are ideal for high bay, high mast, horticulture and stadium lighting.

The ESM-320SxxxMG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that offer programmability, isolated dimming, low inrush current, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They provide Dim-to-Off functionality and Auxiliary Power for powering low voltage controls. They operate from 249-528 Vac and provide the full 320W at a wide output current range.  They are ideal for high bay, high mast, horticulture and stadium lighting.

The ESM-320SxxxMT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers that offer programmability, isolated dimming, low inrush current and a high level of input surge protection. They provide Dim-to-Off functionality and Auxiliary Power for powering low voltage controls. They operate from 249-528Vac and provide the full 320W at a wide output current range.  They are ideal for horticulture, high bay, high mast, horticulture and stadium lighting.

The ESM-680SxxxMG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that offer programmability, isolated dimming, low inrush current, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They provide Dim-to-Off functionality and Auxiliary Power for powering low voltage controls. They operate from 249-528 Vac and provide the full 680W at a wide output current range.  They are ideal for high bay, high mast, horticulture and stadium lighting.

The ESM-680SxxxMT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers that offer programmability, isolated dimming, low inrush current and a high level of input surge protection. They provide Dim-to-Off functionality and Auxiliary Power for powering low voltage controls. They operate from 249-528Vac and provide the full 680W at a wide output current range.  They are ideal for high bay, high mast, horticulture and stadium lighting.

This Series is Not Recommended for New Design and has a last buy date of 8/31/2023.
We recommend the EUM‐075SxxxDTG as a replacement.
The EUD-075SxxxDT series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 75W at a wide output current range.  They are ideal for low bay, tunnel and street lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

This Series is Not Recommended for New Design
We Recommend our EUM-075SxxxDG as a Replacement
The EUD-075SxxxDV series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 75W at a wide output current range.  They are ideal for low bay, tunnel and street lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

The EUD-096SxxxDTA series has been discontinued. Instead, please see the EUD-096SxxxDTA series.The series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 96W at a wide output current range.  They are ideal for high bay, tunnel and roadway lighting applications.

The 2nd Generation EUD-096SxxxDTA series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 75W at a wide output current range.  They are ideal for low bay, tunnel and street lighting applications.

The EUD-096SxxxDTL series is suitable for North American use. They are really in a league of their own. These Controls-Ready, programmable IP67 LED drivers are designed without electrolytic capacitors to ensure an ultra-long lifetime. They provide the full 96W at a wide range of output currents and operate at 90-305Vac. They also include all the enhanced features to provide an industry-leading performance. They are ideal for high bay, tunnel and roadway lighting applications.

This series has been discontinued. Instead, please see the EUD-096SxxxDVA series.
The series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 96W at a wide output current range.  They are ideal for high bay, tunnel and roadway lighting applications.

The 2nd Generation EUD-096SxxxDVA series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 96W at a wide output current range.  They are ideal for low bay, tunnel and street lighting applications.

The EUD-096SxxxDVL series is suitable for global use (except North America). They are really in a league of their own. These Controls-Ready, programmable IP67 LED drivers are designed without electrolytic capacitors to ensure an ultra-long lifetime. They provide the full 96W at a wide range of output currents and operate at 90-305Vac. They also include all the enhanced features to provide an industry-leading performance. They are ideal for high bay, tunnel and roadway lighting applications.

The 2nd Generation EUD-150SxxxDTA series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 150W at a wide output current range.  They are ideal for highbay, tunnel and street lighting applications.

The EUD-150SxxxDTL series is suitable for North American use. They really are in a league of their own. These Controls-Ready, programmable IP67 LED drivers are designed without electrolytic capacitors to ensure an ultra-long lifetime. They provide the full 150W at a wide range of output currents and operate at 90-305Vac. They also include all the enhanced features to provide an industry-leading performance. They are ideal for high bay, tunnel and roadway lighting applications.

The 2nd Generation EUD-150SxxxDVA series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 150W at a wide output current range.  They are ideal for high bay, tunnel and street lighting applications.

The EUD-150SxxxDVL series is suitable for global use (except North America). They are really in a league of their own. These Controls-Ready, programmable IP67 LED drivers are designed without electrolytic capacitors to ensure an ultra-long lifetime. They provide the full 150W at a wide range of output currents and operate at 90-305Vac. They also include all the enhanced features to provide an industry-leading performance. They are ideal for high bay, tunnel and roadway lighting applications.

The 2nd Generation EUD-200SxxxDTA series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 200W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications.

The 2nd Generation EUD-200SxxxDVA series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 200W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications.

The 2nd Generation EUD-240SxxxDTA series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 240W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications.

The EUD-240SxxxDTL series is suitable for North American use. They are really in a league of their own. These Controls-Ready, programmable IP67 LED drivers are designed without electrolytic capacitors to ensure an ultra-long lifetime. They provide the full 240W at a wide range of output currents and operate at 90-305Vac. They also include all the enhanced features to provide an industry-leading performance. They are ideal for high bay, high mast, arena and roadway lighting.

The 2nd Generation EUD-240SxxxDVA is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 240W at a wide output current range. They are ideal for high bay, high mast, arena and roadway lighting applications.

The EUD-240SxxxDVL series is suitable for global use (except North America). They are really in a league of their own. These Controls-Ready, programmable IP67 LED drivers are designed without electrolytic capacitors to ensure an ultra-long lifetime. They provide the full 240W at a wide range of output currents and operate at 90-305Vac. They also include all the enhanced features to provide an industry-leading performance. They are ideal for high bay, high mast, arena and roadway lighting.

The EUD-320SxxxDT series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 320W at a wide output current range. They are ideal for high bay, high mast, aquaculture and horticulture lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

The EUD-320SxxxDV series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 320W at a wide output current range. They are ideal for high bay, high mast, aquaculture and horticulture lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

The EUD-480SxxxDT series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 480W at a wide output current range from 1.4-10A. They are ideal for high bay, high mast, aquaculture and horticulture lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

The EUD-480SxxxDV series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 480W at a wide output current range from 1.05-10.0A. They are ideal for high bay, high mast, aquaculture and horticulture lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

The high-powered EUD-600SxxxDT series is suitable for North American use. They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 600W at a wide output current range. They are designed to address high power solutions by replacing multiple lower wattage drivers and are ideal for high mast, airport, aquaculture, horticulture, port and sports lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

The high-powered EUD-600SxxxDV series is suitable for global use (except North America). They consist of Controls-Ready, programmable IP67 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 600W at a wide output current range. They are designed to address high power solutions by replacing multiple lower wattage drivers and are ideal for high mast, airport, aquaculture, horticulture, port and sports lighting applications. These models include the upgraded features of the 2nd Generation EUD series.

The EUM-075SxxxBG series is suitable for global use. They consist of IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with DALI-2 D4i, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They provide integrated AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 75W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-075SxxxBT series is suitable for North American use. They consist of IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with DALI-2 D4i, design flexibility and a high level of surge protection. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 75W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-075SxxxLG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with digital dimming, isolated dimming, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 75W at a wide output current range.  They are ideal for bay, area and roadway lighting applications.

The EUM-075SxxxLT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers that offer NFC wireless programming, driver health monitoring with digital dimming, isolated dimming, design flexibility, more compact design and a high level of input surge protection. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 75W at a wide output current range.  They are ideal for bay, area and roadway lighting applications.

The EUM-075SxxxMG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that provide Always-On Auxiliary Power and Dim-to-Off functionality for powering low voltage controls. They also offer programmability, driver health monitoring with digital dimming, isolated dimming, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They operate from 90-305Vac and provide the full 75W at a wide output current range.  They are ideal for high bay, area and roadway lighting applications.

The EUM-075SxxxMT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers with Always-On Auxiliary Power and Dim-to-Off functionality for powering low voltage controls. They also offer programmability, driver health monitoring with digital dimming, isolated dimming, design flexibility, more compact design and a high level of input surge protection. They operate from 90-305Vac and provide the full 75W at a wide output current range.  They are ideal for high bay, area and roadway lighting applications.

The EUM-100SxxxBG series is suitable for global use. They consist of IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with DALI-2 D4i, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They provide integrated AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 100W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-100SxxxBT series is suitable for North American use. They consist of IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with DALI-2 D4i, design flexibility and a high level of surge protection. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 100W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-100SxxxLG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with digital dimming, isolated dimming, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 100W at a wide output current range.  They are ideal for high bay, high mast, area and roadway lighting applications.

The EUM-100SxxxLT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers that offer NFC wireless programming, driver health monitoring with digital dimming, isolated dimming, design flexibility, more compact design and a high level of input surge protection. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 100W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-100SxxxMG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that provide Always-On Auxiliary Power and Dim-to-Off functionality for powering low voltage controls. They also offer programmability, driver health monitoring with digital dimming, isolated dimming, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They operate from 90-305Vac and provide the full 100W at a wide output current range.  They are ideal for high bay, area and roadway lighting applications.

The EUM-100SxxxMT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers with Always-On Auxiliary Power and Dim-to-Off functionality for powering low voltage controls. They also offer programmability, driver health monitoring with digital dimming, isolated dimming, design flexibility, more compact design and a high level of input surge protection. They operate from 90-305Vac and provide the full 100W at a wide output current range.  They are ideal for high bay, area and roadway lighting applications.

The EUM-150SxxxBG series is suitable for global use. They consist of IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with DALI-2 D4i, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They provide integrated AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 150W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-150SxxxBT series is suitable for North American use. They consist of IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with DALI-2 D4i, design flexibility and a high level of surge protection. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 150W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-150SxxxLG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with digital dimming, isolated dimming, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 150W at a wide output current range.  They are ideal for high bay, high mast, area and roadway lighting applications.

The EUM-150SxxxLT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers that offer NFC wireless programming, driver health monitoring with digital dimming, isolated dimming, design flexibility, more compact design and a high level of input surge protection. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 150W at a wide output current range.  They are ideal for high bay, high mast, area and roadway lighting applications.

The EUM-150SxxxMG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that provide Always-On Auxiliary Power and Dim-to-Off functionality for powering low voltage controls. They also offer programmability, driver health monitoring with digital dimming, isolated dimming, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They operate from 90-305Vac and provide the full 150W at a wide output current range.  They are ideal for high bay, area and roadway lighting applications.

The EUM-150SxxxMT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers with Always-On Auxiliary Power and Dim-to-Off functionality for powering low voltage controls. They also offer programmability, driver health monitoring with digital dimming, isolated dimming, design flexibility, more compact design and a high level of input surge protection. They operate from 90-305Vac and provide the full 150W at a wide output current range.  They are ideal for high bay, area and roadway lighting applications.

The EUM-200SxxxBG series is suitable for global use. They consist of IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with DALI-2 D4i, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They provide integrated AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 200W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-200SxxxBT series is suitable for North American use. They consist of IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with DALI-2 D4i, design flexibility and a high level of surge protection. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 200W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-200SxxxLG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with digital dimming, isolated dimming, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 200W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-200SxxxLT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers that offer NFC wireless programming, driver health monitoring with digital dimming, isolated dimming, design flexibility, more compact design and a high level of input surge protection. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 200W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-200SxxxMG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that provide Always-On Auxiliary Power and Dim-to-Off functionality for powering low voltage controls. They also offer programmability, driver health monitoring with digital dimming, isolated dimming, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They operate from 90-305Vac and provide the full 200W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-200SxxxMT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers providing Always-On Auxiliary Power and Dim-to-Off functionality for powering low voltage controls. They also offer programmability, driver health monitoring with digital dimming, isolated dimming, design flexibility, more compact design and a high level of input surge protection. They operate from 90-305Vac and provide the full 200W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-240SxxxBG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with DALI-2 D4i, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 240W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-240SxxxBT series is suitable for North American use. They consist of IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with DALI-2 D4i, design flexibility and a high level of surge protection. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 240W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-240SxxxLG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with digital dimming, isolated dimming, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 240W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-240SxxxLT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers that offer NFC wireless programming, driver health monitoring with digital dimming, isolated dimming, design flexibility, more compact design and a high level of input surge protection. They provide integrate AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 240W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-240SxxxMG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that provide Always-On Auxiliary Power and Dim-to-Off functionality for powering low voltage controls. They also offer programmability, driver health monitoring with digital dimming, isolated dimming, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They operate from 90-305Vac and provide the full 240W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-240SxxxMT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers providing Always-On Auxiliary Power and Dim-to-Off functionality for powering low voltage controls. They also offer programmability, driver health monitoring with digital dimming, isolated dimming, design flexibility, more compact design and a high level of input surge protection. They operate from 90-305Vac and provide the full 240W at a wide output current range.  They are ideal for high bay, high mast and roadway lighting applications.

The EUM-320SxxxLG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that offer NFC wireless programming, driver health monitoring with digital dimming, isolated dimming, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They provide integrated AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 320W at a wide output current range.  They are ideal for high bay, high mast, horticulture and stadium lighting.

The EUM-320SxxxLT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers that offer NFC wireless programming, driver health monitoring with digital dimming, isolated dimming, design flexibility, more compact design and a high level of input surge protection. They provide integrated AC power monitoring and Dim-to-Off functionality for powering low voltage controls. They operate from 90-305Vac and provide the full 320W at a wide output current range.  They are ideal for high bay, high mast, horticulture and stadium lighting.

The EUM-320SxxxMG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that provide Always-On Auxiliary Power and Dim-to-Off functionality for powering low voltage controls. They also offer programmability, driver health monitoring with digital dimming, isolated dimming, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They operate from 90-305Vac and provide the full 320W at a wide output current range.  They are ideal for high bay, area and roadway lighting applications.

The EUM-320SxxxMT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers with Always-On Auxiliary Power and Dim-to-Off functionality for powering low voltage controls. They also offer programmability, driver health monitoring with digital dimming, isolated dimming, design flexibility, more compact design and a high level of input surge protection. They operate from 90-305Vac and provide the full 320W at a wide output current range.  They are ideal for high bay, area and roadway lighting applications.

The EUM-680SxxxMG series is suitable for global use. They consist of global, IP66/IP67 LED drivers that provide Always-On Auxiliary Power and Dim-to-Off functionality for powering low voltage controls. They also offer programmability, driver health monitoring with digital dimming, isolated dimming, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They operate from 90-305Vac and provide the full 680W at a wide output current range.  They are ideal for high bay, area and roadway lighting applications.

The EUM-680SxxxMGS series is suitable for global use. They are equipped with panel mount connectors and brackets for easy installation and design flexibility. They consist of IP66/IP67 LED drivers that provide Always-On Auxiliary Power and Dim-to-Off functionality for powering low voltage controls. They also offer programmability, driver health monitoring with digital dimming, isolated dimming, design flexibility, a high level of surge protection and a global cable that helps reduce SKUs for world-wide use. They operate from 90-305Vac and provide the full 680W at a wide output current range.  They are ideal for horticulture, high mast, stadium and aquaculture lighting applications.

The EUM-680SxxxMT series is suitable for North American use. They consist of IP66/IP67 Class P LED drivers with Always-On Auxiliary Power and Dim-to-Off functionality for powering low voltage controls. They also offer programmability, driver health monitoring with digital dimming, isolated dimming, design flexibility, more compact design and a high level of input surge protection. They operate from 90-305Vac and provide the full 680W at a wide output current range.  They are ideal for high bay, area and roadway lighting applications.

The LUD-040SxxxDSF series is suitable for global use. They consist of Controls-Ready, programmable IP20 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 40W at a wide output current range.  They are ideal for dimmable panel and linear lighting applications.

This series is not recommended for new design.
The 2nd Generation LUD-060SxxxDS2 series is suitable for global use. They consist of Controls-Ready, programmable IP20 LED drivers that are designed to provide enhanced features for top-of-the-line performance. They operate from 90-305Vac and provide the full 60W at a wide output current range.  They are ideal for dimmable panel and linear lighting applications.